This page is optimized for large screens. Zooming may cause some display problems.
About
About
The left table allows to select windowss from the catalogs according to several criteria described below.
supplier
Allows to select a windows supplier. Obviously. When "All" is selected, this criterion is not taken into account in the selection.
type
Defines the type of windows to be selected. If "All" is selected, this criterion is not taken into account.
Actually, the proposed windows are either circular or with a square shape.
ref.
This is the reference of the window on the supplier website. If this cell is empty, this criterion is obviously not taken into account.
Note that "Theoretical" groups windows which are not labeled as manufacturers references.
min. thickness
This is the minimum thickness required in mm. If this cell is empty, this criterion is obviously not taken into account.
max. lines/mm
This is the maximum thickness required in mm. If this cell is empty, this criterion is obviously not taken into account.
min. size
This is the minimum size required. If this cell is empty, this criterion is obviously not taken into account.
max. size
This is the maximum size required. If this cell is empty, this criterion is obviously not taken into account.
The results are displayed in a table at the right of the selection table.
The results table columns are the following:
ref.
Displays the window reference. The supplier web page relevant to the reference can be reached by clicking on it.
supplier
Displays the supplier name.
type
Displays the window type.
thickness
Displays the windows thickness in mm.
material
Displays the windows material.
size
Displays the windows size in mm.